usb-порт

pi

Здравствуйте, раньше я подключал к usb-порту смартфон- Raspberry его видел и открывал его sd-карту и начинал его подзаряжать. Обновил apt-get upgrade ... теперь смартфон не видит и не подзаряжает. Флешки видит . Подскажите что можно предпринять?

pi

Подключи смартфон и набери команду

dmesg

скинь сюда что там команда покажет

pi

@nbo#6686

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.17-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:18:35 BST 2021
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x2ac00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
[    0.000000] On node 0 totalpages: 196608
[    0.000000]   DMA zone: 1728 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920
[    0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 194880
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=tty1 root=PARTUUID=8c3ff822-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] Kernel parameter elevator= does not have any effect anymore.
               Please use sysfs to set IO scheduler for individual devices.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 697132K/786432K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 23764K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31910 entries in 63 pages
[    0.000000] ftrace: allocated 63 pages with 6 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000021] Switching to timer-based delay loop, resolution 52ns
[    0.000307] Console: colour dummy device 80x30
[    0.000380] printk: console [tty1] enabled
[    0.000431] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000460] pid_max: default: 32768 minimum: 301
[    0.000666] LSM: Security Framework initializing
[    0.000903] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000927] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002514] Disabling memory control group subsystem
[    0.002632] CPU: Testing write buffer coherency: ok
[    0.003131] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004365] Setting up static identity map for 0x100000 - 0x10003c
[    0.004550] rcu: Hierarchical SRCU implementation.
[    0.005468] smp: Bringing up secondary CPUs ...
[    0.006641] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007939] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.009167] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.009324] smp: Brought up 1 node, 4 CPUs
[    0.009347] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.009359] CPU: All CPU(s) started in HYP mode.
[    0.009370] CPU: Virtualization extensions available.
[    0.010424] devtmpfs: initialized
[    0.028022] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.028277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028306] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.031535] pinctrl core: initialized pinctrl subsystem
[    0.032711] NET: Registered protocol family 16
[    0.037100] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.042855] audit: initializing netlink subsys (disabled)
[    0.043169] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.043771] thermal_sys: Registered thermal governor 'step_wise'
[    0.044900] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.044916] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.045195] Serial: AMBA PL011 UART driver
[    0.063113] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.080122] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:47:07, variant start
[    0.090134] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56
[    0.139230] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.141738] SCSI subsystem initialized
[    0.142001] usbcore: registered new interface driver usbfs
[    0.142065] usbcore: registered new interface driver hub
[    0.142137] usbcore: registered new device driver usb
[    0.144287] clocksource: Switched to clocksource arch_sys_counter
[    1.921892] VFS: Disk quotas dquot_6.6.0
[    1.922013] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.922217] FS-Cache: Loaded
[    1.922455] CacheFiles: Loaded
[    1.932364] NET: Registered protocol family 2
[    1.933369] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.933428] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.933644] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.933837] TCP: Hash tables configured (established 8192 bind 8192)
[    1.934016] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.934073] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.934601] NET: Registered protocol family 1
[    1.935382] RPC: Registered named UNIX socket transport module.
[    1.935396] RPC: Registered udp transport module.
[    1.935408] RPC: Registered tcp transport module.
[    1.935420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.937215] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.940996] Initialise system trusted keyrings
[    1.941258] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.950825] zbud: loaded
[    1.952913] FS-Cache: Netfs 'nfs' registered for caching
[    1.953794] NFS: Registering the id_resolver key type
[    1.953852] Key type id_resolver registered
[    1.953865] Key type id_legacy registered
[    1.954023] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.955310] Key type asymmetric registered
[    1.955325] Asymmetric key parser 'x509' registered
[    1.955397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.955411] io scheduler mq-deadline registered
[    1.955425] io scheduler kyber registered
[    1.960211] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.985135] Console: switching to colour frame buffer device 160x64
[    2.007634] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1280x1024
[    2.013159] bcm2835-rng 3f104000.rng: hwrng registered
[    2.013609] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    2.014481] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    2.026745] brd: module loaded
[    2.038909] loop: module loaded
[    2.040478] Loading iSCSI transport class v2.0-870.
[    2.042195] libphy: Fixed MDIO Bus: probed
[    2.042496] usbcore: registered new interface driver lan78xx
[    2.042575] usbcore: registered new interface driver smsc95xx
[    2.042602] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.770877] Core Release: 2.80a
[    2.770894] Setting default values for core params
[    2.770926] Finished setting default values for core params
[    2.971336] Using Buffer DMA mode
[    2.971350] Periodic Transfer Interrupt Enhancement - disabled
[    2.971363] Multiprocessor Interrupt Enhancement - disabled
[    2.971377] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.971404] Dedicated Tx FIFOs mode

[    2.971892] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = aad04000 dma = 0xead04000 len=9024
[    2.971927] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.971941] dwc_otg: Microframe scheduler enabled

[    2.972016] WARN::hcd_init_fiq:457: FIQ on core 1

[    2.972033] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36

[    2.972052] WARN::hcd_init_fiq:497: MPHI regs_base at b0810000
[    2.972076] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.972118] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.972168] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[    2.972223] Init: Port Power? op_state=1
[    2.972234] Init: Power Port (0)
[    2.972612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.972630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.972646] usb usb1: Product: DWC OTG Controller
[    2.972661] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd
[    2.972676] usb usb1: SerialNumber: 3f980000.usb
[    2.973475] hub 1-0:1.0: USB hub found
[    2.973554] hub 1-0:1.0: 1 port detected
[    2.974674] dwc_otg: FIQ enabled
[    2.974687] dwc_otg: NAK holdoff enabled
[    2.974699] dwc_otg: FIQ split-transaction FSM enabled
[    2.974717] Module dwc_common_port init
[    2.975045] usbcore: registered new interface driver usb-storage
[    2.975273] mousedev: PS/2 mouse device common for all mice
[    2.976496] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.979237] sdhci: Secure Digital Host Controller Interface driver
[    2.979251] sdhci: Copyright(c) Pierre Ossman
[    2.979865] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    2.980559] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    2.980788] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.982651] ledtrig-cpu: registered to indicate activity on CPUs
[    2.983088] hid: raw HID events driver (C) Jiri Kosina
[    2.983255] usbcore: registered new interface driver usbhid
[    2.983267] usbhid: USB HID core driver
[    2.988441] Initializing XFRM netlink socket
[    2.988490] NET: Registered protocol family 17
[    2.988653] Key type dns_resolver registered
[    2.989432] Registering SWP/SWPB emulation handler
[    2.989586] registered taskstats version 1
[    2.989618] Loading compiled-in X.509 certificates
[    2.990499] Key type ._fscrypt registered
[    2.990513] Key type .fscrypt registered
[    2.990526] Key type fscrypt-provisioning registered
[    3.002025] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    3.002149] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[    3.004601] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    3.006318] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    3.006335] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    3.033303] sdhost: log_buf @ (ptrval) (ead07000)
[    3.071477] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.073143] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.074841] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.077837] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.082632] mmc0: sdhost-bcm2835 loaded - DMA enabled (&gt;1)
[    3.085731] of_cfs_init
[    3.086017] of_cfs_init: OK
[    3.087064] Waiting for root device PARTUUID=8c3ff822-02...
[    3.144209] random: fast init done
[    3.172282] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.176637] mmc0: new high speed SDHC card at address aaaa
[    3.177785] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[    3.181781]  mmcblk0: p1 p2
[    3.184527] Indeed it is in host mode hprt0 = 00021501
[    3.219287] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.219379] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    3.220307] devtmpfs: mounted
[    3.246681] Freeing unused kernel memory: 1024K
[    3.259897] mmc1: new high speed SDIO card at address 0001
[    3.334814] Run /sbin/init as init process
[    3.334836]   with arguments:
[    3.334848]     /sbin/init
[    3.334859]     splash
[    3.334870]   with environment:
[    3.334882]     HOME=/
[    3.334893]     TERM=linux
[    3.394358] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    3.394541] Indeed it is in host mode hprt0 = 00001101
[    3.634734] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[    3.634760] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.635671] hub 1-1:1.0: USB hub found
[    3.635794] hub 1-1:1.0: 5 ports detected
[    3.951998] systemd[1]: System time before build time, advancing clock.
[    3.954360] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    4.084745] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[    4.084765] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.087648] smsc95xx v2.0.0
[    4.119276] NET: Registered protocol family 10
[    4.120755] Segment Routing with IPv6
[    4.190347] libphy: smsc95xx-mdiobus: probed
[    4.191637] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:51:aa:e3
[    4.205523] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    4.206744] systemd[1]: Detected architecture arm.
[    4.284344] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    4.292572] systemd[1]: Set hostname to &lt;raspberrypi&gt;.
[    4.430806] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33
[    4.430893] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.430964] usb 1-1.2: Product: Microsoft\u00ae 2.4GHz Transceiver v7.0
[    4.431027] usb 1-1.2: Manufacturer: Microsoft
[    4.442248] input: Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0745.0001/input/input0
[    4.505497] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0] on usb-3f980000.usb-1.2/input0
[    4.524773] input: Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0745.0002/input/input1
[    4.526024] input: Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0745.0002/input/input2
[    4.595312] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0] on usb-3f980000.usb-1.2/input1
[    4.611354] input: Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:045E:0745.0003/input/input3
[    4.674917] input: Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:045E:0745.0003/input/input5
[    4.677424] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\u00ae 2.4GHz Transceiver v7.0] on usb-3f980000.usb-1.2/input2
[    5.172164] random: systemd: uninitialized urandom read (16 bytes read)
[    5.189673] random: systemd: uninitialized urandom read (16 bytes read)
[    5.190592] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.190874] random: systemd: uninitialized urandom read (16 bytes read)
[    5.191692] systemd[1]: Listening on Syslog Socket.
[    5.192539] systemd[1]: Listening on udev Control Socket.
[    5.193674] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.194515] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.194674] systemd[1]: Reached target Swap.
[    5.195413] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.346922] i2c /dev entries driver
[    5.964209] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.104376] systemd-journald[118]: Received request to flush runtime journal from PID 1
[    6.786803] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    6.789778] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    6.789815] [vc_sm_connected_init]: start
[    6.797653] [vc_sm_connected_init]: installed successfully
[    6.832297] mc: Linux media interface: v0.10
[    6.880726] videodev: Linux video capture interface: v2.00
[    6.955196] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.956592] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.957753] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.958015] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    6.968378] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    6.975379] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.982697] bcm2835_audio bcm2835_audio: card created with 4 channels
[    6.983207] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    6.994758] bcm2835_audio bcm2835_audio: card created with 4 channels
[    7.030184] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    7.030245] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    7.030562] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    7.033013] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    7.033775] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    7.034802] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    7.034894] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    7.034922] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    7.034944] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    7.034994] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    7.039554] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    7.039641] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    7.044762] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    7.058542] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    7.058605] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    7.317256] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.467403] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.582184] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[    7.595030] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    7.595398] usbcore: registered new interface driver brcmfmac
[    7.643054] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2
[    7.789120] random: crng init done
[    7.789142] random: 7 urandom warning(s) missed due to ratelimiting
[    7.870742] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    7.870904] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    7.871800] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[   10.347328] uart-pl011 3f201000.serial: no DMA platform data
[   10.510992] 8021q: 802.1Q VLAN Support v1.8
[   10.964434] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   11.291268] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   12.086914] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
[   12.090608] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   12.096682] smsc95xx 1-1.1:1.0 eth0: Link is Down
[   15.395770] Bluetooth: Core ver 2.22
[   15.395866] NET: Registered protocol family 31
[   15.395873] Bluetooth: HCI device and connection manager initialized
[   15.395896] Bluetooth: HCI socket layer initialized
[   15.395908] Bluetooth: L2CAP socket layer initialized
[   15.395929] Bluetooth: SCO socket layer initialized
[   15.406194] Bluetooth: HCI UART driver ver 2.3
[   15.406209] Bluetooth: HCI UART protocol H4 registered
[   15.406289] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   15.406462] Bluetooth: HCI UART protocol Broadcom registered
[   15.749884] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.749897] Bluetooth: BNEP filters: protocol multicast
[   15.749916] Bluetooth: BNEP socket layer initialized
[   18.265239] fuse: init (API version 7.32)
[   19.862919] Bluetooth: RFCOMM TTY layer initialized
[   19.862962] Bluetooth: RFCOMM socket layer initialized
[   19.862991] Bluetooth: RFCOMM ver 1.11
[  208.477060] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

pi

[ 208.477060] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

вставляю вытыкаю записей не прибавляется

pi

вставил флешку добавилист

[ 1613.117547] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[ 1613.248451] usb 1-1.4: New USB device found, idVendor=8644, idProduct=8003, bcdDevice= 1.00
[ 1613.248475] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1613.248488] usb 1-1.4: Product: USB Flash Disk                
[ 1613.248500] usb 1-1.4: Manufacturer: General                       
[ 1613.248511] usb 1-1.4: SerialNumber: 0510450000001B52
[ 1613.249451] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 1613.250320] scsi host0: usb-storage 1-1.4:1.0
[ 1613.431483] usbcore: registered new interface driver uas
[ 1614.318904] scsi 0:0:0:0: Direct-Access     General  USB Flash Disk   1.00 PQ: 0 ANSI: 2
[ 1614.320799] sd 0:0:0:0: [sda] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 1614.321234] sd 0:0:0:0: [sda] Write Protect is off
[ 1614.321254] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 1614.321638] sd 0:0:0:0: [sda] No Caching mode page found
[ 1614.321653] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1614.353526] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1614.370390]  sda: sda4
[ 1614.373436] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 1614.792458] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

pi

странно провод был целым

pi

Последняя строка достаточно внятно говорит, что нужно делать:

Please run fsck

pi

@sv-lary#6698 так это когда флэшку вставляешь. Её надо проверить, да

А смартфон судя по всему не определяется из-за кривого кабеля. Если там даже зарядка не идёт