hostapd wi-fi
-
Кто знает что и где нужно поправить,что бы всё заработало?# /etc/hostapd/hostapd.confinterface=wlan0ssid=##..###hw_mode=gchannel=6macaddr_acl=0wpa=1wpa_key_mgmt=WPA-PSKwpa_pairwise=TKIP CCMPwpa_ptk_rekey=600wpa_passphrase=20011979# /etc/default/hostapd# Defaults for hostapd initscript## See /usr/share/doc/hostapd/README.Debian for information about alternative# methods of managing hostapd.## Uncomment and set DAEMON_CONF to the absolute path of a hostapd configuration# file and hostapd will be started during system boot. An example configuration# file can be found at /usr/share/doc/hostapd/examples/hostapd.conf.gz#DAEMON_CONF=/etc/hostapd/hostapd.conf# Additional daemon options to be appended to hostapd command:-# -d show more debug messages (-dd for even more)# -K include key data in debug messages# -t include timestamps in some debug messages## Note that -B (daemon mode) and -P (pidfile) options are automatically# configured by the init.d script and must not be added to DAEMON_OPTS.##DAEMON_OPTS=""# /etc/default/isc-dhcp-server# Defaults for isc-dhcp-server initscript# sourced by /etc/init.d/isc-dhcp-server# installed at /etc/default/isc-dhcp-server by the maintainer scripts## This is a POSIX shell fragment## Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).DHCPD_CONF=/etc/dhcp/dhcpd.conf# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).DHCPD_PID=/var/run/dhcpd.pid# Additional options to start dhcpd with.# Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead#OPTIONS=""# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?# Separate multiple interfaces with spaces, e.g. "eth0 eth1".INTERFACES="wlan0"# /etc/dhcp/dhcpd.conf# Sample configuration file for ISC dhcpd for Debian### The ddns-updates-style parameter controls whether or not the server will# attempt to do a DNS update when a lease is confirmed. We default to the# behavior of the version 2 packages ('none', since DHCP v2 didn't# have support for DDNS.)#ddns-update-style none;# option definitions common to all supported networks...option domain-name "example.org";#option domain-name-servers ns1.example.org, ns2.example.org;#default-lease-time 600;#max-lease-time 7200;# If this DHCP server is the official DHCP server for the local# network, the authoritative directive should be uncommented.#authoritative;# Use this to send dhcp log messages to a different log file (you also# have to hack syslog.conf to complete the redirection).#log-facility local7;# No service will be given on this subnet, but declaring it helps the # DHCP server to understand the network topology.#subnet 10.152.187.0 netmask 255.255.255.0 {#}# This is a very basic subnet declaration.#subnet 10.254.239.0 netmask 255.255.255.224 {# range 10.254.239.10 10.254.239.20;# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;#}# This declaration allows BOOTP clients to get dynamic addresses,# which we don't really recommend.#subnet 10.254.239.32 netmask 255.255.255.224 {# range dynamic-bootp 10.254.239.40 10.254.239.60;# option broadcast-address 10.254.239.31;# option routers rtr-239-32-1.example.org;#}# A slightly different configuration for an internal subnet.#subnet 10.5.5.0 netmask 255.255.255.224 {# range 10.5.5.26 10.5.5.30;# option domain-name-servers ns1.internal.example.org;# option domain-name "internal.example.org";# option routers 10.5.5.1;# option broadcast-address 10.5.5.31;# default-lease-time 600;# max-lease-time 7200;#}# Hosts which require special configuration options can be listed in# host statements. If no address is specified, the address will be# allocated dynamically (if possible), but the host-specific information# will still come from the host declaration.#host passacaglia {# hardware ethernet 0:0:c0:5d:bd:95;# filename "vmunix.passacaglia";# server-name "toccata.fugue.com";#}# Fixed IP addresses can also be specified for hosts. These addresses# should not also be listed as being available for dynamic assignment.# Hosts for which fixed IP addresses have been specified can boot using# BOOTP or DHCP. Hosts for which no fixed address is specified can only# be booted with DHCP, unless there is an address range on the subnet# to which a BOOTP client is connected which has the dynamic-bootp flag# set.#host fantasia {# hardware ethernet 08:00:07:26:c0:a5;# fixed-address fantasia.fugue.com;#}# You can declare a class of clients and then do address allocation# based on that. The example below shows a case where all clients# in a certain class get addresses on the 10.17.224/24 subnet, and all# other clients get addresses on the 10.0.29/24 subnet.#class "foo" {# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";#}#shared-network 224-29 {# subnet 10.17.224.0 netmask 255.255.255.0 {# option routers rtr-224.example.org;# }# subnet 10.0.29.0 netmask 255.255.255.0 {# option routers rtr-29.example.org;# }# pool {# allow members of "foo";# range 10.17.224.10 10.17.224.250;# }# pool {# deny members of "foo";# range 10.0.29.10 10.0.29.230;# }#}subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.10 192.168.1.255; option domain-name-servers 192.168.1.2; option routers 192.168.1.1; interface wlan0 ;}option domain-name ##..###;subnet 192.168.55.0 netmask 255.255.255.0 { range 192.168.55.10 192.168.55.100; option domain-name-servers 8.8.4.4, 8.8.4.4; option routers 192.168.55.1; interface wlan0 ;}еще не плохо static ip wi-fi получить/etc/network/interfaces поправитьтам будет для всех точек в /etc/wpa_supplicant/wpa_supplicant.conf static ip?
